nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

intermittent wifi

Natkatsmom

I have followed all the instructions to reset and update the switch post loss of power, all three options, and am unable to execute access to install the patch or flash the ROM. I have a computer expert assisting and unable to do this. What is the next possible solution? Can someone remote in and assist or can I send the unit for updates? This is extremely frustrating and impacting work.

Find more posts tagged with

Accepted answers

All comments

imran.sanadi@commscope.com

Hi @Natkatsmom

Greetings!!!

Thank you for reaching out to RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that you are encountering intermittent internet connectivity.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

We may need to check some configurations of your RUCKUS ICX-7150-C12P Switch to troubleshoot this issue.

To proceed with troubleshooting the issue, please follow the steps outlined below to access the Command Line Interface (CLI) and provide the necessary command outputs:

1. First, identify the current IP address assigned to the switch ICX-7150-C12P by your local router. You can use an IP scanner tool to easily locate the switch's IP address on your network. Here is a guide on how to perform this using IP Scanner free applications:

/kb/articles/10-how-to-find-the-ip-address-of-the-ruckus-devices-switch-and-aps-using-ip-scanner-free-applications

2. Once you have identified the IP address of the switch, proceed to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P switch. Here is a guide on how to access the CLI:

/kb/articles/8-how-to-access-the-command-line-interface-cli-of-the-ruckus-icx-7150-c12p-switch

If you can access the Command line the prompt should look like below:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

3. After successfully accessing the CLI, please execute the following commands and provide the outputs:

enable

show version

show flash

show inline power

show inline power detail

show interface brief

Please share the command outputs or screenshots if you encounter any issues or errors during these steps.

Feel free to reach out if you have any questions or require further assistance.

Thank you for your cooperation and patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

brunodavid

If your internet keeps dropping, it can be frustrating and disruptive. Start by checking your modem and router; directv tv packages restarting them can resolve many connectivity issues. Ensure that your cables are secure and free from damage. If the problem persists, consider changing your Wi-Fi channel or updating your router's firmware. Contact your internet service provider for further assistance if needed.

imran.sanadi@commscope.com

Hello @brunodavid

Greetings!!!

I hope this message finds you well.

Thank you for your valuable suggestion. We sincerely appreciate the time and assistance you've provided.

Please don't hesitate to contact us with any further queries or concerns regarding RUCKUS Lennar Home setups.

Once again, thank you for your time and support.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

imran.sanadi@commscope.com

Hi @Natkatsmom

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Natkatsmom

Verizon confirms it is not a problem on their end. The switch is showing disconnected but when i try to flash the rom the message is unable to execute. Tonight I plan to connect the update directly without IP addresses but I need professional help to do this because this is far too advanced for a regular person. I will update when I have completed this step and hope for success.

imran.sanadi@commscope.com

Hello @Natkatsmom

Greetings!

Thank you for your response and the update.

The next step will be to review the switch configuration using specific commands to check the flash and other details. Please provide the command outputs at your convenience so that I can assist you further.

If you have any questions, please don’t hesitate to reach out.

Thank you again for your patience.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

imran.sanadi@commscope.com

Hi @Natkatsmom

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

imran.sanadi@commscope.com

Hi @Natkatsmom

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Natkatsmom

I have tried the above steps and have paid the electrician who installed the system to try. It was unsuccessful both with the ruckus and my wallet. The switch keeps denying access. I now have a dumb home with half house wifi. This forum is completely unhelpful and Lennar should do better. You are good at following up but patience grasshopper when I have to hire someone to come to my home and lose working wages.

imran.sanadi@commscope.com

Hi @Natkatsmom

Thank you for the response.

Apologies, effective November’2022, ‘Ruckus Support for Lennar Homes customers will no longer be handled by phone or email or remote session. We will be exclusively supporting customers via this community forum support model only.

This forum is on best best-effort support basis.

Could you please share the details or screenshot at the point you are stuck?

We have tried to create the guides as non-technical as possible so that they are not much difficult to follow. However, if you continue to have difficulty following the steps, I would recommend that you seek outside help or a technician.

Please do let us know if there is any help required on the troubleshooting steps or if you are stuck at any point. We are happy to help you.

Thank you again for understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

imran.sanadi@commscope.com

Hi @Natkatsmom

Greetings!

Please use the private chat option to respond so we can proceed further. For your reference, I have included a screenshot below.

Thank you once again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community