nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Rack Ear Screws for ICX 7150 48p

u35828

Hello,

I just picked up a used ICX 7150-48P on ebay to replace a toy Ubiquiti fanless poe switch.

The seller had shipped the switch without the rack ears attached.

The only issue is that the supplied screws were too big. The screws was that came with the ears in a baggie taped to the switch wouldn't engage the threads on the switch cabinet.

Thinking this was the wrong size, I ended up getting a bag of 50 8-32 x 5/16 from Amazon.

They were the same size, same coarse threading. Still doesn't fit.

I was hoping for a mechanical drawing or other document showing screw size but no joy.

Thanks in advance,

John

Find more posts tagged with

Accepted answers

u35828

Thanks for the link, but I had already viewed it previously. I will be unkind and say that document was absolutely useless, as it mentioned a couple of rack kits that used 8-32 screws, which are too big for the threads on the side of the ICX 7150-48P.

On a lark, I went and ordered the next size down from Amazon:

#6-32x5/16" flat head screws. Guess what, these worked.

All comments

imran.sanadi@commscope.com

Hi @u35828
Greetings!!!

Thank you for contacting the RUCKUS Community forums.

Could you please let me know if this is a Lennar Home RUCKUS setup?

Please confirm.

Thank you again.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

u35828

No, it is not. As per my original post, the ICX-48P replaced a Ubiquiti USW-24P.

imran.sanadi@commscope.com

Hello @u35828

I hope this message finds you well.

Thank you for confirming. I am now forwarding this case to the ICX Switching team for further assistance.

We appreciate your patience and understanding.

Best regards,

Imran Sanadi
RUCKUS Lennar Home Community

Chandini

Hi u25828

Thank you for reaching us

Please refer the below mentioned Hardware reference guide for more details about the switch installation

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-881BDF03-79D5-4098-822C-A6B482D3A6E9.html

You can also refer the "mounting the device" section from the above link for more details about installing the unit.

I hope the above details help

Thanks

u35828

On a lark, I went and ordered the next size down from Amazon:

#6-32x5/16" flat head screws. Guess what, these worked.

Chandini

Hi u3528

Thank you for sharing your experience. It’s great to hear that the #6-32x5/16” flat head screws worked well for you! Your feedback about the document is valuable, and I appreciate your openness.

Thanks