Hello,
I am a new homeowner of a 2019 built Lennar home. The previous homeowner didn't share any existing info.
I have the following equipment installed in the Garage (Network Switch - ICX-7150 C12P), One Access point mounted to the ceiling of one bedroom on the 1st floor. The second Access point is mounted to the ceiling on the 2nd floor.
The network Switch is powered and 4 POE wires are connected to them already. A couple of them going to APs and one going to thermostat and I am not worried about where the 4th is going and couldn't figure it out.
One Access Point on the 1st floor seems to be working (Pwr green solid, CTL green solid, both wifi LEDs are amber)
2nd Access Point on the 2nd floor Power is solid red (seems like it is getting power but not working)
After seeing some previous posts, and videos I connected the Internet Gateway to the Network Switch and I am unsure what to do from here. Since I don’t know the WiFi SSID or password. I connect my Macbook to the switch using an ethernet cable. Now I am connected to the internet via cable to the switch.
How do I log in to the administration page? I tried unleashed.ruckuswireless.com and it didn’t work. Neither I could find out the IP of the switch to at least try to ssh. Thank you in advance.
