nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Third incident- Ruckus router hung!

Karupasu

After two times of what I thought was a successful firmware update the router is hung again! Please see earlier posts for model info. Need help to upgrade firmware yet another time through USB. Or need help replacing the router!

Find more posts tagged with

Accepted answers

All comments

Karupasu

This is an emergency as the Ring security system is out of commission due to Ruckus router issue.

Karupasu

imran.sanadi@commscope.com

Hi @Karupasu

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS ICX-7150-C12P Switch is stuck in boot mode.

You already tried resetting using a paper clip which is not resolving the issue permanently. At this point, we need to perform a software recovery since it can be that the image flash is corrupted in basic words the unit is not able to boot up properly and needs to re-install the image to boot up properly.

Below is the Guide and Video Link to perform the Software recovery process:

Please refer to the below guide and Video link:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Video Link: https://www.youtube.com/watch?v=Ql22blH_CGo

Please note, we must use ethernet cable (both ends RJ45 plugs) and USB to type C cable both together as described in steps 2 & 3 in the guide link.