Ruckus ICX 7150-C12P change IP address

Question

I have fiber optic and I want to change my Ruckus to match my new fiber optic...............I need help because its affecting my house.

Chandini · Answer

Hi Heydre

Thank you for reaching us.

* Could you please let me know if you are from Lennar Homes ? 
* Could you also brief us more about the requirement and issue you are seeing ? 
* Which port on the switch is the fiber connected and could you please let us know if this fiber connection is for your uplink router ?

Thanks

Mayank · Answer

Hi Heydre ,

Thank you for posting you query !!!

From the concern raise I understand  that you have two query as mentioned below :

1>As mentioned in the heading that there is a requirement to change ip address , so for this please refer the below steps :

IP address for a device running Layer 2 software

device(config)# ip address x.x.x.x/x
device(config)# ip default-gateway x.x.x.x
device(config)# write memory

IP address and mask to a router port on a device running Layer 3 software.

device(config)# interface ethernet 1
device(config)# ip address x.x.x.x/x
device(config)# write memory

Assign an interface IP address to the out-of-band management Ethernet port.

device(config)# interface management 1
device(config)# ip address x.x.x.x/x
device(config)# write memory

You can also refer the below link

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-3A82588D-F1EF-4325-8396-EED525B9D243.html

2>Now the second query is you have a new fiber optic and you to match it with Ruckus switch ICX 7150-C12P:

So ICX 7150-C12P has 2× 1/10 GbE uplink/stacking SFP/SFP+ ports as fiber ports in order to check compatibility you can use the following command :

show media
show media validation

show media eth x/x/x

I hope this information helps you

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further .

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Thanks