nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ICX Switch is Connecting

flo253

Why is this like this and why would I want to enable (or fix) this?

Screenshot 2023-08-13 144631.png

Find more posts tagged with

Accepted answers

Zairah

Hello @flo253

It seems ssh is not enabled on the switch. Please try enabling ssh on the switch using cli.

Contact us via chat, comment that you already have a post that we have approved the RMA for you, copy the link from this post and paste it into the chat to initiate the unit replacement.

Regards,

Zairah Javeed
Sr Technical Support Engineer | L2 TAC Wired
support.ruckuswireless.com/contact-us

COMMSCOPE
now meets next

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

All comments

Zairah

Hello @flo253

It seems ssh is not enabled on the switch. Please try enabling ssh on the switch using cli.

Contact us via chat, comment that you already have a post that we have approved the RMA for you, copy the link from this post and paste it into the chat to initiate the unit replacement.

Regards,

Zairah Javeed
Sr Technical Support Engineer | L2 TAC Wired
support.ruckuswireless.com/contact-us

COMMSCOPE
now meets next

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

flo253

How do I enable SSH?

happytohelp

Hi flo253,

Please follow below doc to enable ssh:

https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-8AAB14D8-A662-493A-8504-F7457B9BED02.html

flo253

Where do I input these commands?

flo253

I have installed the new switch. Will it always say switch is connecting and disconnected on the right hand side? Screenshot 2023-08-29 182710.png