nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ZoneDirector 10.1.2.0.318 (MR2 Refresh7) SNMP MIBs (ZIP)

Hi.

I update my ZD1200 to latest software that I can run for my AP's 10.1.2.0.318

I found also this file in downloads https://support.ruckuswireless.com/software/2761-zonedirector-10-1-2-0-318-mr2-refresh7-snmp-mibs-zip

How can I install this one? Or should I just unzip it?

Thank you.

Find more posts tagged with

Accepted answers

These are only needed when you are using an SNMP tool to monitor certain information (snmp traps and polling). Simple Network Management Protocol (SNMP) is a set of protocols for managing networks. SNMP sends messages to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Are you using SNMP ? If not you can ignore the SNMP MIB as they are of no use to you.

Below some article to help explain SNMP :

https://support.ruckuswireless.com/articles/000007319
https://support.ruckuswireless.com/articles/000004129

Best Regards

Vineet

All comments

You can upload the ZIP file to your monitoring tool and it should work.

Best Regards

Vineet

@Vineet_nejwala

Thank you for answer.

Can you please let me know which monitoring tool did you mean?

I tried to check on ZD1200 interface on website but didn't find any thing.

See picture if is in any help?

Do I even need to upload this file or it will work fine also without it?

Screenshot 2023-08-06 122926.png

These are only needed when you are using an SNMP tool to monitor certain information (snmp traps and polling). Simple Network Management Protocol (SNMP) is a set of protocols for managing networks. SNMP sends messages to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Are you using SNMP ? If not you can ignore the SNMP MIB as they are of no use to you.

Below some article to help explain SNMP :

https://support.ruckuswireless.com/articles/000007319
https://support.ruckuswireless.com/articles/000004129

Best Regards

Vineet

Hi @Vineet_nejwala

Understood. I'm not using this tool so then I will not install SNMP MIB.

Thank you for your help and all info provided.

Quick Links

Tags