Hello,
I am building out a "zero-touch" template for ICX. Switches will follow DHCP Option 66 to a TFTP server, grab a config according to mac address, and get setup. HOWEVER, in testing, I cannot log into auto-provisioned switches, even when supplying a username and pass in the config.
Example, ICX7150-C12-SwitchA.B.C.cfg (on TFTP server):
hostname ICX-XYZ
username super privilege 0 create-password MYFAVORITEPASS
username super2 privilege 0 create-password MYFAVORITEPASS
7150 is factory reset.
It grabs above config.
I can see from LLDP that switch took config and updated its hostname.
I can SSH to device, HOWEVER I cannot login as super or super2 (even with default pass sp-admin).
The same occurs if I omit the username lines. That is, auto-provision config on TFTP is only:
hostname ICX-XYZ
This also prevents login using the default sp-admin password.
What is the correct procedure to set users and passwords via TFTP auto-provisioning (Option 66/150)?
I may be missing a piece of documentation, and if so, I would appreciate a pointer to get myself up to speed.
Test device:
ICX7150-C12
FastIron 8.0.95kT211
