hello..i already upgrade firmware ruckus..but manager port list keep appeared although i've already remove and save it ...when i reboot switch the command appeared again..pls help
pls help anyone
Did you already try this:
conf t
no manager port-list 987
yup....already try.....and gone after type no manager port-list 987...do wr mem and reboot switch...after reboot...it appeared again...
Hi Wanji,
I just tried the below in lab on ICX 7550 switch running GZS08095h.bin and it worked for me.
ICX7550-24F Switch#sh run | i managermanager registrarmanager port-list 987
ICX7550-24F Switch(config)#no manager port-list 987SZ is not in disabled state so unable to configure
ICX7550-24F Switch(config)#sz disableSZ Disable Initiated...SZ Connection would be disconnected now if connected...
ICX7550-24F Switch(config)#no manager port-list 987ICX7550-24F Switch(config)#endICX7550-24F Switch#sh run | i managermanager disablemanager registrar
If it does not work in your device. please open a support case so we can formally investigate.
You can use below link to log a ticket:https://support.ruckuswireless.com/contact-us
Thanks,Vivek
hi...already use this config...and the command is gone.....BUT AFTER REBOOT the command is back..pls help
Do you have a chance to do 'write memory' to save config changes before you reboot the device
hello..i already upgrade firmware ruckus..but manager port list keep appeared although i've already remove and save it ...when i reboot switch the command appeared again..pls help
