Dear ALL,
I'm troubleshooting the ICX stack switch, i found the active member's PUS status changed, the other stack member will reboot, anyone can correct me?
Support
##### Session : Console
Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details`@Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details`@Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details
##### Session : SSH 1
Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Unit 1 loses all neighbors.Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Active unit 1 deletes u2 but keeps its static config.Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Active unit 1 deletes u3 but keeps its static config.
I would say just that information is a bit too vague to know for certain. I would advise opening a support case (see my signature) so it can be properly investigated. Please include the following output with your case:
skip
show tech
show chassis
dm stk show hit log
This is quite urgent, i attached here first
*content removed by moderator*
i had downloaded the log, can you help?
Hey @acmesupport
We cannot allow such links on a public forum. Please open a support case to get official assistance on this item. Or feel free to paste any output and we will give best-effort help here.
I got the smiliar several logs, the unit 1's PSU1 are connected to Mains Electricity, the PSU2 are connected to UPS.
