ICX7150 no output show inline power

Question

Hi AllWe have an ICX7150-24P-4X1G POE 24-port, with  10 R510 AP's.

All the AP's are down but switch is up leading to me a POE issue.

Switch has been rebooted with no change, However there is no output to the sh power inline command.

would the POE module failing cause there to be no output?

simon_pollard · Answer

As Vincent suggested try reloading the PoE firmware. I would suggest upgrading to 8.0.70d and the PoE upgrade will be done automatically. If that does not help you should open a TAC case as the switch will probably need to be RMA'd.

unknown · Answer

Hi All, Thank you for your responses, I forgot to add, site was live with all AP's working before today. I have pasted the output of POE detail below - curiously empty...poe inline is enabled on all ports sh poe detailPower Supply Data On unit 1:++++++++++++++++++Power Supply Data:++++++++++++++++++POE Details Info. On Unit 1 :General PoE Data:+++++++++++++++++FirmwareVersion----------------Cumulative Port State Data:+++++++++++++++++++++++++++#Ports    #Ports     #Ports   #Ports    #Ports       #Ports     #PortsAdmin-On  Admin-Off  Oper-On  Oper-Off  Off-Denied   Off-No-PD  Off-Fault-------------------------------------------------------------------------Cumulative Port Power Data:+++++++++++++++++++++++++++#Ports  #Ports  #Ports        Power       PowerPri: 1  Pri: 2  Pri: 3  Consumption  Allocation-----------------------------------------------

david_chavarria · Answer

Hello ImranIn order to find what is the cause of this issue, we need to analyze the following:Was the switch providing POE correctly before or is this new implementation?Is the output "show inline power" the one not showing anything?Have you tried the command "show inline power detail" , what do you see in it?  (POE firmware version has like different numbers or 0.0.0.0 build 0, or see anything like Hardware version UNKNOWN) ?What Software image version is the switch running?Have you tried to disable and re enable power in the interfaces?If you see those errors and if upgrade to the latest version for example 8070c, does not fix the problem please open a new ticket.Regards.