Cant access diferent subnet from rucckus R320 wifi stations

Question

We got mikrotik switch (ip 192.168.0.1), then cable goes to Cisco switch, cant be configured, then cable from him goes to ruckus switch ICX 7150-C12P-2X1G(Ip: 192.168.0.7, with set 7 ports POE), then one cable from him goes to Ruckus R320( Ip 192.168.4.1 auto dhcp, main) and six more cables goes to 6 Ruckus R320. From WIFI i cant access 192.168.0.2 adress. Han you help me with setup riht setings?

michael_brado · Answer

In Unleashed, WLAN Advanced Options, you can specify other than default VLAN 1.
So you could have on WLAN for VLAN1, and one WLAN for Other-VLAN.
Does your switch trunk both VLANs to your AP ports is the question?
Can you attach a PC to a switch port configured with Other-VLAN, and get a correct IP/subnet/def-gw from your DHCP router?
You'll need to check that you have both VLANs trunked to all your Unleashed AP ports.

unknown · Answer

Dhcp handling our router and switch.We have Ruckus R320 unleashed, one is set as main all connected to ruckus switch ICX 7150-C12P-2X1GFrom router cable goes to switch cant be configured, and from him to ruckus switch ICX 7150-C12P-2X1G

unknown · Answer

Ok , so how many vlans do you have?What is handing out DHCP?Do you have a controller or are you using Unleashed?