nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

How do you show the arp table on a ICX 7450 running 08.0.30q ?

unknown

How do you show the arp table on a ICX 7450 running 08.0.30q ?
Our previous version: 07.3.00j that ran on the FCX 648 you could simply issue a "sh arp" command.

Find more posts tagged with

Accepted answers

All comments

BenBeck

"show arp" in 8030 as well.

unknown

Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

unknown

Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

BenBeck

Keep in mind those will only arps that we need to maintain. Are we the gateway for your hosts? Is this an L2 or L3 switch?

unknown

You might need to do a ping sweep first. Sh Arp works fine in 08.00.30Q. I just checked

scott_farrand_f

Arp will not show anything if your management vlan isn't the client vlan. If you're trying to hunt down a given device, it's a little more complicated, and you'd need to start from your routing switch/device.

unknown

show arp