nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

New firmware, old bootrom

sinisa_babic

Hello,

I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them.

telnet@ICX7150#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
Compressed Sec Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Compressed Sec Boot Code size = 786944, Version:10.1.21T225 (mnz10121)

Any idea how to solve this?

Find more posts tagged with

Accepted answers

BenBeck

Hey There,

Are you seeing a bootrom mismatch? 'show version' and 'show boot-monitor' should tell you. The boot code is included in the UFI image. If you are seeing any kind of mismatch, just go ahead and re-copy the UFI image to the appropriate partition (pri/sec) and it should get updated.

All comments

sinisa_babic

Thank you for response.

BenBeck

Hey There,

sinisa_babic

@ben_beck

I did that and now is ok, there is no mismatch anymore. Thanks.