ICX 7150 Recovery

Question

Hello all!

After doing "erase startup config" switch requires username and password. Firmware 09.00a, default super and sp-admin doesn't work.

Command "no password" doesn't work, switch still requires username and password. How I can log in now?

BenBeck · Answer

Hello,

The procedure for this is outlined in the 'Password and Device Recovery' section of the 9000 RUCKUS FastIron Management Configuration Guide.

https://docs.commscope.com/bundle/fastiron-09000-managementguide/page/GUID-7B91A49C-1368-4E1E-B4B2-503A520D18C3.html

alexandr_potkin · Answer

Thanks for all, problem issued for using tftpboot and downgrade firmware version