error invalid input when trying to create ve interface

Question

I'm getting the error invalid input when trying to create ve interfaceFirmware version :  SPR08061cI have created a VLAN , added an untagged port to created VLAN .When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"

agent_halal · Answer

I have a ip addr set too, how did you clear it? The port it says I have an ip addr is my uplink port to a switch but eventually to my modem, would clearing the ip effect anything? anything helps!

unknown · Answer

Solved. It was an ip addr set on interface 1/1/10All works nowThanks

BenBeck · Answer

Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?