SZ100 with ICX7750-48XGC ,,,how to connect physically

Question

i am implementing a NEW SZ100 with an existing network setup ,, the Core Switch is ICX7750-48XGC with 7 stacks..am new with Ruckus WLC as well as Ruckus Switches... please help me to understand its physical connectivity and Data plane communication.am Connected first 2 ports of WLC to Core Switch ,, the LAG is created at Core with 2 ports ,,,Port 5/1/47 and 48 ..these 2 ports are part of LAG-11lag blue static id 11 ports ethe 5/1/47 to 5/1/48--------------------------------------vlan 12 name Managment by port untagged lag 11

is the setup and doing is correct ??

please suggest any correction if required

thanks,
Anvar

lotus_administr · Answer

Hi Santhosh ,

these pages are not able to open ..looks links are not working

lotus_administr · Answer

santhosh_dk · Answer

HI Anvar,

LAG will not be supported by SZ100, there is Feature Request
already to include this feature.

Kindly connect a Ethernet cable to port1 or Port2 of SZ100 to
configure, please refer Quick setup and getting started Guide below.

https://ruckus-support.s3.amazonaws.com/private/documents/2817/SZ100-QuickSetupGuide-RevG-20200827.p...

https://ruckus-support.s3.amazonaws.com/private/documents/2816/SZ100-GettingStartedGuide-RevH-20200827.pdf?AWSAccessKeyId=AKIAJM3QLNNKLOV235TQ&Expires=1602882873&Signature=SuNz91%2BO0hWQHF6PmJIw5ieMImo%3D

Regards

Santhosh