undoFailed when setting port to dual-mode via SNMP on the icx switch

Question

Hi,I want set port on ICX7450-24 to dual mode via snmpMy request snmpset -v2c -c community 192.168.1.30 1.3.6.1.4.1.1991.1.1.3.2.6.1.3.192.23 i 4 1.3.6.1.4.1.1991.1.1.3.3.5.1.4.23 i 1 1.3.6.1.4.1.1991.1.1.3.3.5.1.24.23 i 192But i got error like Error in packet.Reason: undoFailedFailed object: SNMPv2-SMI::enterprises.1991.1.1.3.3.5.1.24.23Port 23 have Default vlan untaggedAny suggestions?

isaac_madriz · Answer

Hi Denis,I hope you are doing great, apologies for the delay, I internally confirmed the correct OID and syntax needed:First you have to tagged the port to the vlans needed:X= VLAN

Y= PORT

C=3 remove

C=4 add

D=1 tagged

D=2 untagged

To Add a port to a vlan:

snmpset -v2c -c ruckus 192.168.1.30 1.3.6.1.4.1.1991.1.1.3.2.6.1.3.X.Y i C 1.3.6.1.4.1.1991.1.1.3.2.6.1.4.X.Y i D

Then on a different instruction use the following OID to specify in which vlan the port should be set as dual-mode:

snmpset
-v2c -c ruckus 192.168.1.30 1.3.6.1.4.1.1991.1.1.3.3.5.1.24.Y i XPlease test that format and syntax and let me know your results.Regards.

hashim_bharooc1 · Answer

Hi Denis,

Hope you are doing great.

Seems like your string is ONLY removing port 23 from VLAN 4. 
Is the port 23 already a member of VLAN 4?
If you run command "show run | b vlan 4"  Do you see it as a member of VLAN 4?

Please let us know.
Thanks
Hashim

unknown · Answer

Hi Isaac,I have IronWare Version 08.0.70c On 23 port i have 2 taged VLANs( for example 102vlan and 192vlan) . When I set snSwIfInfoTagMode with value 3 i got error .Error in packet.Reason: wrongValue (The set value is illegal or unsupported in some way)Failed object: SNMPv2-SMI::enterprises.1991.1.1.3.3.5.1.4.23My snmp request -- snmpset -v2c -c community 192.168.1.30 1.3.6.1.4.1.1991.1.1.3.3.5.1.4.23 i 3Thanks for your reply on this.