nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ICX 7150 -TFTP issues

hayder_al_windi

hello experts,

I have two ICX switches 7150 .

* I was trying to copy the configuration from the switch to TFTP or vise versa

* The TFTP and the switch are on the same subnet , ping successful from the laptop to switch , Ping failed from switch to laptop

_ I left the switch port that connect to laptop untagged on default Vlan , still not successful to ping the laptop from the switch

- I have created Vlan on the switch and tagged on the switch port connect to Laptop ,still not successful to ping the laptop from the switch .

_I have created Vlan on the switch and this time untagged on the switch port connect to Laptop ,still not successful to ping the laptop from the switch .

on other troubleshooting effort

- I have connected USB stick to switch and tried to copy the configuration from the USB to switch but it giving me error code 2

_ I have tried to copy the configuration from the switch to USB stick , it show me "copy done"

but actually when I checked the USB there is no configuration file

switch firmware version is 08.0.90eT211

any further troubleshooting tips ??

Find more posts tagged with

Accepted answers

BenBeck

Considering you had a successful ping one way, I would lean towards something on the laptop/tftp device blocking the communication. Also double-check subnet masks to make sure they match. I would go back to that one-way ping scenario and check those items.

All comments

chris_storck

Have you checked to see if the firewall on your laptop is blocking incoming TFTP?

hayder_al_windi

@chris_storck

I did that , no firewall rule

also I tried different laptop , I thought maybe company laptop has some firewall rule but even the personal laptop didnt work

also I tried to use USB stick but no luck either

BenBeck

hayder_al_windi

@ben_beck

thanks ben , so I found the problem on TFTP blocking UDP traffic but now I have another problem

I can download config file from the switch to PC "TFTP" But cant upload config file from PC "TFTP" to switch , it giving me error code 1 . I looked up on Ruckus portal and not much details about error code 1

Image_ images_messages_60e9042f8ec49518f5913d1f_4b5baaae92aaed3730046e4118972e5e_TFTP-0cccc93f-e486-46aa-8e0c-55fb77f634d9-548108425.PNG

http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-monitoringguide/GUID-64C2EDC0-CC65-4244-BD3A-630E8C7014D2.html

hashim_bharooc1

Hello Hydar,

Please try to power cycle the ICX, seems like ICX flash is being used by some processes.

Hope this helps.

If after power cycle you still have issues please open a ticket with TAC to further troubleshoot. Use link below:

https://support.ruckuswireless.com/contact-us

Hope this helps.

Thanks

Hashim

unknown

browse the correct file in the TFTP Application