SNMP v3 is not working properly in ICX6450 switches

Question

can you please share the valid configuration of SNMP ver3 in ICX6450 as I configured it but the SNMP agent did identify or get data from my switches

jijo_panangat · Answer

Great Chris!

Glad that you've figured it out.

Thanks
Jijo

unknown · Answer

Hi JijoI'd looked at those. It turned out that my snmpwalk command was missing the mandatory level option! So for anyone looking later, you can use this command to snmpwalk the switch once you have configured v3 as per the examples in Jijo's link. This proves you've done it correctly! snmpwalk -v 3 -a MD5 -A password1234 -x AES -X password1234 -l authPriv -u admin2 x.x.x.x

jijo_panangat · Answer

Hey Chris,Perhaps not ! If you are looking for a config examples, we have it covered in FI management config guide. Pls look for 'SNMP v3 configuration examples'http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-managementguide/GUID-F0E639A2-5109-49...ThanksJijo