nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

factory reset - CLI- No access to power

abilashpr

Hi

We don't have access on power of switch, would like to know if there is Command to factory reset the ICX 7150 ?

Thank you,

Regards,

Abilash PR

Find more posts tagged with

Accepted answers

All comments

ravi_vatsavai

Hi,

If you have CLI access, then you can use 'erase starup-config' followed by a 'reload' command which will wipe out the configuration on the switch.
Thanks,
Ravi

abilashpr

Thanks Ravi.

ryan_guerrero_6

Here is another way to do the same thing plus reset the password:

Reset Password

1. Press and hold Ctrl+y then release and push M then release and push Enter

2. Type “reset” at OS prompt

3. Press B (for monitor) keep pressing until you’re in monitor mode

4. Type – “no password” or to completely wipe type “use default-configuration”

5. To reboot type “boot or boot system flash primary”

abilashpr

Thank you Ryan.

unknown

I will add...

If it comes from a stack configuration,

device# stack unconfigure all

or device# stack unconfigure me