BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
ICX Switches
When I add a second port to a existing LAG it is immediately disabled, why?
unknown
Link aggregation issue
Everything appears to be correctly configured for some reason upon addition of the secondary port to the LAG it disables. I have tried everything short of completely eliminating the lag and reconfiguration but would like to avoid that if at all possible.
Find more posts tagged with
Accepted answers
All comments
Reeegman
Not sure if I can help.....however it might help if you identify the Product\model type you are referring to.......the version of code\OS that you are running on the platform and device is on the other end of that LAG.
unknown
Source
ICX7750-48XGF
SW: Version 08.0.70cT203
Receiving
ICX7450
SW: Version 08.0.30rT211
jijo_panangat
Hi Michael,
Well, Not sure it detects a potential loop, Do u see any error message when lag is disabled ?
Thanks
Jijo
unknown
I do not see anything on the log that pertains to either of the ports int he LAG
Reeegman
Michael,
Need to get on a call right now.....you most likely have LACP block issue....
http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-l2guide/GUID-35DFAD56-2479-4FA1-A448-...
Check this out...make sure you meat all criteria for LAG formation......
simon_pollard
Hi Michael
There were changes to LAG operation in release 8.0.61 which may be causing issues as you have 8.0.30 on one node and 8.0.70 on the other. I would recommend upgrading the 8.0.30 node to match the other switch and make sure you have dynamic LAGs configured. Or migrate them both the 8.0.90d.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
