ICX-7150 - How do I make a regular switch port into a trunk port?

Question

I have copper from the ISP. How do I make port 48 into a trunk port?

BenBeck · Answer

Hey @nbctcp You can do something like this: conf t vlan 10 20 30 tag e 1/1/24 Similarly, you can edit multiple interfaces at once as well: conf t int e 1/1/1 to 1/1/24 or conf t int e 1/1/1 e 1/1/5 e 1/1/10

nbctcp · Answer

in ARUBA
I can do this
int 24
tag 10,20,30
INSTEAD OF
vlan 10
tag e 1/1/24
vlan 20
tag e 1/1/24
vlan 30
tag e 1/1/24

look at that. how many lines I can save

How come I can't do that in icx 8.0.95
could I ask it will be added in next release
tq

unknown · Answer

Jeff - I don't believe you need to make the port a tagged port, unless the ISP is specifically sending frames that include VLAN headers.  Most do not.  I would simply leave the interface connected to your ICX untagged in vlan 1.