BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
ICX Switches
Router Mode vs Switch Mode
unknown
How do I easily change the 7650 from Switch mode to Router Mode in the beginning
Find more posts tagged with
Accepted answers
All comments
abilashpr
Hi Jeff,
In config mode always keep the secondary as the boot image using command "boot system flash secondary", this makes the secondary that is routing image as the default boot image another one is flash the primary image to have the router image too.
Hope it helps!!!
Regards,
Abilash PR
unknown
Boot from router code bin file
unknown
So in config mode just the command "boot system flash secondary" will do the trick? Thank you so much for your reply and help.
unknown
It will if your secondary is router code. I only have older models and none of them were configured the way Jeff mentioned buy who knows. Do a "show flash" and see if your file(s) start with S or R.
unknown
Yeah I know the show flash. I have done it before but it just seamed complicated and thought there had to be an easier way. I appreciate the help. I will be trying it tomorrow.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
