nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ICX 7150 VLAN 1

johan_castro_a

Hi, I'm new to icx's. I have a 7150-24P. I'm trying to configure ethernet 1/1/24 as the uplink port so I tagged in all vlans except vlan1 (default vlan, which I don't use).

When I run sh runn this is showing on vlan 1, is this normal or is there something wrong? I don't want or need to use vlan 1 at all.

vlan 1 name DEFAULT-VLAN by port
no untagged ethe 1/1/24

Thanks.

Find more posts tagged with

Accepted answers

jijo_panangat

Hi Johan,

The running config shows port 1/1/24 is not untagged on vlan 1. By default all L2 ports are part of vlan 1, You can verify the vlan association of a port using 'show vlan e 1/1/24'

All comments

jijo_panangat

Hi Johan,

The running config shows port 1/1/24 is not untagged on vlan 1. By default all L2 ports are part of vlan 1, You can verify the vlan association of a port using 'show vlan e 1/1/24'

johan_castro_a

Thanks. How can I remove the port from vlan 1?

jijo_panangat

'no untagged ethe 1/1/24' under vlan 1.

johan_castro_a

Thank you!