POE module of ICX 7450 24P is not working ?

Question

I tried to enable POE on ICX 7450-24P, but it doesn't show any output.Core#show po  poe                         inline power information  port                        Show port security  power-savings-statistics    Power savings  statisticsCore#show poe  DECIMAL      UNIT-ID  STACKID/SLOT/PORT  debug-info   show inline power debug information  detail       show inline power detailed information  emesg        Event Trace Logging messages  pd           show pd ports powerCore#show poeCore#show in  inline                      inline power information  interfaces                  Port statusCore#show inline power  power   show inline powerCore#show inline power  DECIMAL      UNIT-ID  STACKID/SLOT/PORT  debug-info   show inline power debug information  detail       show inline power detailed information  emesg        Event Trace Logging messages  pd           show pd ports power  |            Output modifiers  Core#show inline power 1/1/1Core#

I tried to upgrade the POE firmware on this switch, but the Switch reboots and doesn't upgrade the firmware. I am running latest 8090.Stack unit 1:
  Compressed Pri Code size = 32454872, Version:08.0.90T213 (SPR08090.bin)
  Compressed Sec Code size = 32454872, Version:08.0.90T213 (SPR08090.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.15T215 (spz10115)
  Compressed Sec Boot Code size = 786944, Version:10.1.15T215 (spz10115)
  Code Flash Free Space = 1578074112
Core#

Any help appreciated.

Regards,
Abilash PR.

unknown · Answer

You should still also still do a show inline power detail, too to ensure there is nothing wrong with the POE Firmware. (i.e. that it is present)I do not have a 7450 /w copper ports, so I will look at a 7150; since, it is in the same family.  What you want to see is a firmware version.  Much of the time when the PoE+ module goes bad on an ICX (have not had this happen on any 7xxx series), those details are simply missing though admittedly it may have been from a bad internal power supply when I had issues because my "show chassis" did not return OK on the particular impacted ICX-6430-48P units back in the day.SSH@REDACTED#sh inline powe detPower Supply Data On unit 1:++++++++++++++++++Power Supply Data:++++++++++++++++++Power Supply #1:        Max Curr:       6.9 Amps        Voltage:        54.0 Volts        Capacity:       370 Watts        PoePower:       370 WattsPOE Details Info. On Unit 1 :General PoE Data:+++++++++++++++++FirmwareVersion----------------02.1.1 Build 002HardwareVersion----------------V2R2

unknown · Answer

Hi Jijo,Thank you for the clarification, this really helped solving an issue which is 2 years old.Regards,Abilash PR.

jijo_panangat · Answer

Hi Abilash,The power supply installed is regular one and not POE compliant. You need to change the ps module to power PD devices.Thanks