nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

stacking over copper ICX 7250

unknown

hello All,

can we do a stacking if we connect copper transceiver to uplink port on ICX7250-48P-2X10G ??

Find more posts tagged with

Accepted answers

DarrelRhodes

Hi Amjad,

The Ruckus certified 10G-BASE-TX RJ-45 optic (10G-SFPP-TX-A) cannot be used for stacking.

Passive and active copper DAC cables are available and can be used for stacking.

For further details please refer to the Ruckus Optics family data sheet for further details: https://www.commscope.com/product-type/enterprise-networking/optical-transceivers/

Also be aware that 10Gb RJ45 optics have high power consumption and generate high temperatures, so it may not be possible to run 2x of these modules side-by-side.

Best regards,
Darrel.

All comments

jijo_panangat

Hi Amjad,

What is the transceiver type/model been used for stacking ?
'show media' o/p will help.

Thanks
Jijo

DarrelRhodes

Hi Amjad,

The Ruckus certified 10G-BASE-TX RJ-45 optic (10G-SFPP-TX-A) cannot be used for stacking.

Passive and active copper DAC cables are available and can be used for stacking.

For further details please refer to the Ruckus Optics family data sheet for further details: https://www.commscope.com/product-type/enterprise-networking/optical-transceivers/

Also be aware that 10Gb RJ45 optics have high power consumption and generate high temperatures, so it may not be possible to run 2x of these modules side-by-side.