nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

FCX reload with dhcpv6 snooping

unknown

I've set up ipv6 dhcp snooping and this is causing the unexpected reload of the switch stack. The stack consists of 4 FCX-648GS, two with POE +. The FI version is 08.0.30t. The VLAN has a VE interface configured on an MLX-8. The strange thing is that another place has the same configuration and the same does not happen. Any idea what that might be?

Find more posts tagged with

Accepted answers

All comments

BenBeck

in 'show version', is it being reported as a warm or cold start? Also, please see if there is any data in 'dm save <1-4>. If you are seeing a crash, I would recommend opening a case with a show tech and output mentioned prior.

unknown

was warm start and there is a lot of data on dm save 1.

BenBeck

Got it. Please submit a case with the following and we can analyze:

show tech
dm save 1
dm save 2
dm save 3
dm save 4

unknown

Done. Case ID: 00955174

unknown

unfortunately we no longer have support for this equipment.