ICX 7150-24P corrupted flash?

Question

Switch lost it's configuration after a power outage.During boot i am getting the following messages:
Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS error (ubi1:0 pid 566): ubifs_recover_leb: corrupt empty space LEB 11:249856, corruption starts at 767809UBIFS error (ubi1:0 pid 566): ubifs_scanned_corruption: corruption at LEB 11:1017665UBIFS error (ubi1:0 pid 566): ubifs_scanned_corruption: first 8192 bytes from LEB 11:1017665UBIFS error (ubi1:0 pid 566): ubifs_recover_leb: LEB 11 scanning failedmount: mounting ubi1:resources on /opt failed: Structure needs cleaningResource partition is mounted!!Starting TPM InfraGroup tss and User tss createdkernel.hostname = localhosthostname set to localhostStarting TCSD DaemonTCSD Up and Runningdma_mem_base: 0x96000000, dma_mem_len: 0x8000000, warm_mem_base: 0x9f500000, warm_mem_len: 0xb00000Creating TUN deviceDumping the partition's content ...Starting the FastIron.
Any help appreciated!

hashim_bharooc1 · Accepted Answer

Hi Nomatch,Hope you are doing Great.Please open a tac case to work on this issue.Please use following link to open a TAC case:https://support.ruckuswireless.com/contact-us

Hope this helpsThanksHashim

jijo_panangat · Accepted Answer

Hello, You may try the below procedure for recovery, This will copy a fresh image from tftp server and boot from it incase of a corrupted image.However, Software recovery should be performed under the supervision of a Ruckus support engineerhttp://docs.ruckuswireless.com/fastiron/08.0.90/fastiron-08090-upgradeguide/GUID-9B5D5A56-039D-44FB-...ThanksJijo