nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Is there an official way to request features?

corey_costello

Over the years, I've used a lot of various CLIs and each have their own awesome ideas.

So, is there a way to request features?

If so, tab auto complete of user defined options is AMAZING.

Also, "logging synchronous" and "Show display | top set" to show the commands to make the entire configuration.

Find more posts tagged with

Accepted answers

All comments

vincent_felisaz

Hi Corey

You'll be happy with the lastest release 8.0.90 in which there is Tab auto-completion. And I'm agree with you that is very useful and save time.

Other features need to be investigated with Product Manager.

Cheers
Vince

unknown

8.0.90a does not seem to do tab auto-completion for user-defined items

ICX7150-C12 Switch(config)#ip access-list extended TEST

ICX7150-C12 Switch(config-ext-nacl)#permit ip any any
ICX7150-C12 Switch(config-ext-nacl)#exit

ICX7150-C12 Switch(config)#int e 1/2/1

ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group
DECIMAL Number
ASCII string Access List Name
frag
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TES
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TES

If it were going to do that, it would offer to autocomplete the word TEST being it was a user-defined object.

corey_costello

Lololol no it isn't.

jijo_panangat

Hello Corey,

As explained above, tab based auto completion seems limited to system level commands, This enhancement is added from 08.0.80 onwards, You may reach out to your accounts or SE team to channel this request to PM team.