BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
ICX Switches
Jumbo frame support
scott_farrand_f
I'm trying to figure out how to have different MTU's defined on a 7150 or 6450 switch.
I've read that I have to enable Jumbo frames on the general configuration label and then restart the switch to enable the support.
It appears that the MTU should be configurable per interface, however, the ip mtu commands seem to be missing when in an interface (e.g. eth 1/1/1) on a 7150.
I'm guessing I'm missing something...
Find more posts tagged with
Accepted answers
All comments
scott_farrand_f
Apparently the interface IP MTU is only available on the routing image.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
