ZoneDirector 1100 unresponsive, WIFI down

lonnie_3404113
Contributor

‎02-28-2015 05:53 AM

I shutdown my ZD1100 last night in order to move some power cables to a different PDU in my rack. When I restored power, it did not boot properly, and WIFI is down. I've power cycled it a couple times, including moving it back to its original PDU, but it doesn't respond to a ping and the Status light is off, although the Power light and the NIC LED's are on.
What does no Status light mean?

craig_burchfiel
New Contributor III

‎02-28-2015 02:16 PM

go to this artical and see if this helps you.
0 Kudos

lonnie_3404113
Contributor
In response to craig_burchfiel

‎03-02-2015 04:50 AM

Thanks for your help. Which article? Looks like you missed adding a link.
0 Kudos

john_d
Valued Contributor II

‎02-28-2015 07:10 PM

Sorry to hear about your troubles -- It sounds like your ZD is in Rescue mode. Here's a document describing the recovery procedure: Zone Director 1100 Rescue Mode - Ruckus Support


Basically, it's plugging in an ethernet cable to the second ethernet port then pointing your browser at 192.168.0.2.

From there, it will only accept a specific sequence of upgrades. Having gone through this procedure twice, the sequence that I've found for the minimum number of jumps is:
9.3.2.0.3 -> 9.6.2.0.13 -> 9.8.2.0.15 -> 9.9

lonnie_3404113
Contributor
In response to john_d

‎03-02-2015 04:51 AM

Awesome. This is somewhat different than what Support had me try on Saturday. I'll try this this morning yet.
0 Kudos