Hi @Estdele 

Greetings!

Thank you for your response and the update.

As outlined in my initial post, please verify the device and cable connectivity as detailed in the referenced article.

If the connectivity is confirmed to be correct, you may proceed with performing a factory reset on the RUCKUS Access Points (the link for this procedure is provided in the initial post) and then configure them with your new Wi-Fi network then you are good to use.

Should you encounter any difficulties during this process, please let me know.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi  
RUCKUS Lennar Home Community