R510 Standalone, Dhcp reservation

Question

Hello,
I have an R510 with Standalone firmware R510_106.1.0.0.469

I have set the dhcp server for the LAN local network, but I can't find how to enter the reservations. 
For example the client with a given mac gets a determined ip address, etc.

Ankush_Chandan · Answer

Hi Faboi,We have this option on our Unleash Platform. All you have to do is download the latest 200.7 image from our support site and upgrade your AP to unleash. https://support.ruckuswireless.com/software/2043-ruckus-unleashed-ap-200-7-10-102-64-ga-refresh1-sof...
Regards,-Ankush

david_black_594 · Answer

I'm probably not the best to answer this because we never use APs in standalone mode. DHCP and NAT appear to be supported but I don''t see any ability to do reservations.  Ruckus controller and AP functionality is very good and better than most competitors, but dhcp functionality has always been mediocre at best.

unknown · Answer

R510 in Standalone mode has the ability to start a dhcp server.screenshot:https://socifi-doc.atlassian.net/wiki/download/thumbnails/3440938/05.png?version=1&modificationDate=1421846421196&cacheVersion=1&api=v2&effects=drop-shadow&width=600&height=490 i need to insert reservation,like thishttps://i.kinja-img.com/gawker-media/image/upload/s--kNx9RGe4--/c_fit,f_auto,fl_progressive,q_80,w_636/18ixfgyg4z7rxjpg.jpg It is possible?