cancel
Showing results for 
Search instead for 
Did you mean: 

What is the handover rate in multi-access point location, where a client needs to connect to good signal nearby..........

anil_piske
New Contributor
In the architecture when all access points are controlled by Zone Director what is the handover (switch over rate ) rate  in multi-access point location, where a client needs to connect to good signal nearby........... 
3 REPLIES 3

robert_lowe_722
Contributor III
Not sure I understand your question 100%. Are you asking at what signal strength a client needs to see another AP in order to roam between access points? 

anil_piske
New Contributor
Yes because the client is connected at low signals to the same access point even when it is near another access point with good signal.

monnat_systems
Valued Contributor II
Hi Anil...

read the KBA below

https://support.ruckuswireless.com/answers/000002277

this should help...