Can I use Passpoint with Samsung Galaxy S3 phones on ZoneDirector?

Question

Association Response doesn't reply from  ZoneDirector.

-------------

Interworking Element 107

Accessnetwork Type: WildCard

Internet : 0

ASRA : 0

ESR : 0

UESA : 0

-------------

keith_redfield · Answer

As I've mentioned in other threads - PassPoint configuration is very complex, and so attempting to diagnose these issues in a public forum is not recommended. Please open a support case as mentioned above.

pop_brian · Answer

I also check Set HESSID to wpa_supplicant.conf of GS3.

Set HESSID=11:22:33:11:22:33 to APC and STA, then Fail.

pop_brian · Answer

I still have the problem. HESSID mismatch between APC and STA is occurred.

1.Set  HESSID=03:00:00:00:00:00 to APC

-> Success

Assoc Req. with no Interworking HESSID. Interworking bit is exist.

2.Set  HESSID=58:93:96:4e:7a:e8 to APC

->fail

No response to Assoc Req. from AP

AP deauthenticate STA.

HESSID mismatching is occurred, STA's    Assoc Req is not include the HESSID infomation.

Also, I checked wpa_supplicant.conf of GS3.

There is no HESSID values.