R700 not xmitting on 2.4GHz

Question

I have 5 R700 Waps and a ZD 1200 and two of the WAPS are showing an amber light for the 2.4GHz band, I am trying to figure if they are faulty or there is setting that is preventing them xmittin, I am not  an IT giuy and this is all new to me. Any help is sincerely appreciated

unknown · Answer

OK. I am not on site now. Ill do that tonight and post the output of the query. Thanks - Jon

vivek_gupta_eaj · Answer

Hi Jon,

You can SSH into the AP and run the below command and paste the output

get wlanlist

Regards,
Vivek

unknown · Answer

Hi, thanks, I just updated my post, the issue is that I am unable to connect 2.4 GHz equipment to my WAP's, In the past with other WAP's I have seen two connections available 2.4 and 5, on my current setup I only see one SSID and I assume its 5GHz. How do I know if there is a 2.4 connection available?