How can change the system name in vSCG?

Question

We need to change the name of the vSCG controller. Initially, it was a DEMO installation, but we purchased a valid license to get a operational mode to the end clients.
How can we change the system name?

sanjay_kumar · Answer

Hi Anthony,Try the below stepsKindly find the below command to change the Cluster name.ruckus(config)# cluster-name example : ruckus(config)# cluster-name ruckusHere are the steps.>>> If it is a single node then it is fine.>>> If you have Leader and Follower, first login to the Leader, change the cluster name from the command cluster-name >>>All the services on both the controller will restart.>>>Once the restart is done, check the cluster information on the GUI and check if the leader and follower remains the same.Please perform this operation during downtime.

unknown · Answer

Is there no way to rename the cluster at all? I have a VSZ-High Scale cluster and our organization has changed its name, I really need to change the cluster name accordingly, please advise.Thanks.

michael_brado · Answer

Hi Alejandro,
   
    You can change your vSCG 'hostname', but not a cluster name. 
To change your vSCG hostname:

1.  Login to your vSCG (or SCG/SZ100)
2.  Go to Enable mode:  enable
3.  Go to Config mode:   config
4.  Configure new hostname:   hostname 
        Warning: this will reset some system services, ok to continue (yes/no)?
5.  Enter 'yes'

You will see the hostname updated.