nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

zf2925 became zf2825. Is it possible to turn back?

alexey_belichen

I purchased on eBay zf2925 but in web GUI it appeares as 2825, so it does not have VLAN functionality that I need. Is it possible get it 2925? Or it has hardware from 2825?

Find more posts tagged with

Accepted answers

All comments

jelle_alten_606

Is it possible to do a firmware upgrade? What software version does it run on?

alexey_belichen

The software version was 5.3.1.0.58 up to this moment. As I remember I upgraded it earlier. Now I have successfully upgraded it with local file 2925_4.2.0.0-132_Main.Bl7 that I had. Software version appears as 4.2.0.0.132 but the top line is "Ruckus 2825 Multimedia Wireless Router"

jelle_alten_606

I can setup a little server of mine, that you can use to upgrade in steps, if you want to. My ZF2925 is all the way up to Software Version 8.1.1.0.12 now. After each upgrade I had to reboot the device to see if it was running the new version.

I'm not sure how it will respond if it thinks it is a 2825, but it might be worth a shot...

jelle_alten_606

catch me on twitter for direct contact. @jellealten

alexey_belichen

It would be grateful, I would try! Jelle, you will wonder but I don't use twitter and facebook 🙂

jelle_alten_606

I'd think the 2825 is really a different device than the 2925, but you can give it a shot anyway. Try using one of these urls, see if it accepts it and upgrades, and remember to reboot after every reboot. Let me know how it goes.

Image_ images_messages_5f91c40d135b77e24793a378_54780803fcc58cda272ced8ea96173b2_Schermafbeelding20131030om22.1-598a433d-1b4a-422c-a055-aef8dcf41d08-1304879534.png1383198857

Image_ images_messages_5f91c40d135b77e24793a378_54780803fcc58cda272ced8ea96173b2_Schermafbeelding20131030om22.1-598a433d-1b4a-422c-a055-aef8dcf41d08-1304879534.png1383198857

jelle_alten_606

You can also try to start with 500 or 420, see if it accepts it.

jelle_alten_606

I meant reboot after every upgrade, of course...

alexey_belichen

Thank you! I have upgraded it to 8.1.1.0.12, rebooted and defaulted.

From log model is 2925 (see below).

The top line still 'Ruckus 2825 Multimedia Wireless Router' - this is not a big deal,

There is still no wlan configuration, and I see "Port Forwarding" instead of it - this is a problem!

Support info shows next log:

Current date/time : 2013-10-31 17:13:14 GMT

### Boot Version ###

RB.0.3.2.1 - built 17:06:18, Jun 26 2006

### Active SW ###

SW Version: 8.1.1.0.12

### Firmware Upgrade ###

Check Result: new software detected, but download failed

Check Time : 12 mins 42 secs ago

### SW images on flash ###

#Main image Control+Header Info#

ipaddr: 195.190.0.43

file: 2925_8.1.1.0.12.Bl7

size: 5103616

MD5 : FFEAE12B66F070FF8FDCD01743DA1237

type: 0

local_file

Magic: RCKS

next_image: d0000

invalid: 0

hdr_len: 160

compression: l7

load_address: 0x80041000

entry_point: 0x80290000

timestamp: Fri Jan 29 17:46:22 2010

binl7_len: 5103456

hdr_version: 3

hdr_cksum: 0x5595

version: 8.1.1.0.12 ( 8.1.1.0.12 )

MD5: FFEAE12B66F070FF8FDCD01743DA1237

product: zf2925 (0)

architecture: 1

chipset: 0

board_type: 5

board_class: 2

customer:

unknown

Would you guys still have the 8.1.1.0.12 file for the ZF2925? I have been looking at the ruckus download site but all I can find for the zf2925 is the 4.1.0.96 and 4.2.0.0.132... go figure.

I have downloaded and applied 4.2.0.0.132, but I wonder why is that the latest on the site. Is it a case of a nomenclature change to version 4?

Thanks

alexey_belichen

Jose, I don't have a firmware file. But the url's provided by Jelle in this tread are still working.
Image_ images_messages_5f91c41d135b77e24796d024_392a55672edb8799168b3c0b45280b63_RackMultipart2016011324106r8pu-e38b3d81-82d4-4e16-af78-780b36ba4550-1805877781.png1452695930

Image_ images_messages_5f91c41d135b77e24796d024_392a55672edb8799168b3c0b45280b63_RackMultipart2016011324106r8pu-e38b3d81-82d4-4e16-af78-780b36ba4550-1805877781.png1452695930

unknown

Thanks Alexey, Jelle was kind enough to send me the 8.1 firmware on a separate post. Can't understand why Ruckus doesn't list it in the download section of the ZF2925...

Thanks!

michael_brado

I can find no official ZoneFlex 2925 AP directory in the firmware repository,
on any 8.1 release standalone AP firmware.

If you had a 2925 connected to a ZD1000 running 8.1.1.0.12, and then did
a factory default on the AP, it would be running 8.1.1.0.12.

Otherwise, only Ruckus Tech Support would know how to pull a supported
AP image out of a ZoneDirector firmware on a compatible version.

I suspect that 4.2.0.0.132 was the last officially 'stable/recommended' release
for the EoL zf2925 line.

The above attempts to change the middle 3 digits of AP control file will not help,
as the FTP server has been deprecated of 2925 code this long after the last fw
support date of December 31, 2010.

https://ruckus-support.s3.amazonaws.com/private/documents/115/end_of_life_announcement_zf2925.pdf?AW...

jelle_alten_606

That's interesting. I still have these firmware files sitting in a folder, without fiddling with a ZD. I'm pretty sure I downloaded them from the Ruckus support site a while ago:

2925_5.0.3.0.199.Bl7
2925_6.0.3.0.21.Bl7
2925_7.0.1.0.3.Bl7
2925_7.1.0.0.39_FCS.Bl7
2925_8.0.2.0.7.Bl7
2925_8.1.1.0.12.Bl7

But maybe they never made it as stable?