Interpreting Spectrum Analysis

Question

Hi, I just want to make sure I am correctly understanding the readout of the spectrum analysis feature on ZD. What does a 'bad'/''good' reading look like?

Here's an example from one of our APs

Thank you!

unknown · Answer

Usually you will get issue can't connect to WiFi, this is because issue channel ultilization from device is -65db or above. So recommendation is stay in 1-65db

unknown · Answer

There are reports of issues at the site that this AP is deployed at, and I wanted to make sure that channel utilization wasn't an issue.

michael_brado · Answer

Good/bad is subjective.  Your shot shows typcial 2.4g bandwidth utilization, channels 1 and 11 a little hotter than channel 6.
Are you having any AP reboots or client problems on this AP?