Adding Eero to existing Lennar home network

manny_ajvalia

I have the typical Lennar home Ruckus network: 
Switch: ICX 7150-C12P and two R510 access points.  My ISP (Frontier) is upgrading my home connection 1Gig therefore need an upgraded router. They sent me the "Eero Pro 6e" router and will also send me additional Eero devices to put around the home.

Is this possible to just swap out my old router with Eero? Any suggestions?

Thank you very much in advance 🙂

imran.sanadi@commscope.com

Hi @manny_ajvalia 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you need assistance in connecting a new Router to your existing Lennar RUCKUS setup.

Yes, you can replace the new Router, it’s ethernet cable and other devices must be connected in any 1 in-12 ports of the Switch. Please refer to the below screenshots and articles for more information.

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Once connected as per the above explanation, reboot (unplug and plug from the power output) your RUCKUS ICX-7150-C12P Switch and new ISP Router once.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.