nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

No status lights in the access point

allans88

Find more posts tagged with

Accepted answers

All comments

pinky_ruckus

Hi @allans88,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working, and Access Points do not have power.

Could you please let us know the answers to the below queries to assist you better?

Was this working before or is it a new installation? If it worked before, was there any power outage before you started facing this issue?
On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

3. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from the Router to a laptop/PC).

4. May I know how many Access Points are connected to the Switch? Could you please confirm if any of the status lights are ON (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

allans88

It was working before, came home and I received a message from Ring saying it was offline. Noticed there were no lights on the access point, reset the Ruckus, still no lights. As far as I know there was no power outage.

The ISP is working and stable.

Thank you,

Allan

pinky_ruckus

Hello @allans88 ,

Greetings!

Thank you for sharing the information and picture.

From the pictures you shared, the status lights on the Switch is Amber and the Power lights is green, which means that the Switch is stuck in a boot mode

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to fix the issue when the Switch is in boot mode.

/kb/articles/4-fixing-ruckus-switch-with-an-amber-orange-light-on-syst-green-light-on-pwr-no-lights-on-aps
Please follow the process as explained in the article and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

allans88

I disconnected power, pressed the reset button, and reconnected power, lights came back on Access point and it booted up

pinky_ruckus

Hello @allans88 ,

Greetings!

Thank you for sharing the details.

It is great to hear that the Access points are back to normal state.

We suggest upgrading your switch to the latest stable version to avoid this issue in the future.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the switch to the recommended version

/kb/articles/1-how-to-upgrade-ruckus-icx-7150-c12p-from-non-unified-forwarding-image-ufi-to-a-stable-ufi-version

Please follow the process explained in the article and let me know if you have any queries in this regard.

Thank you again. We appreciate your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

allans88

I cannot find the IP address using IP scanner or through CMD

imran.sanadi@commscope.com

Hi @allans88

Thank you for contacting the RUCKUS Lennar Home Community.
I hope you're doing well.

I noticed that you have raised another post on the Lennar forum regarding this issue. Please refer to the same post thread, as one of our Engineers, Pinky, will continue assisting you there.

Here is the link to your original post:
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/After-losing-power-ruckus-won-t-come-back-online/m-p/108255#M28528

Thank you for your understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support