nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

LBO

AhmeeR

I am new to ruckus. I have SZ 144 controller with R850 APs and third parties, Huawei and Cisco, cascaded switches connecting them.

I need to configure LBO (local internet breakout) for my all SSIDs (WLANs) and APs. How can I do that?

Any help please. Thank you

Find more posts tagged with

Accepted answers

James

Hello,

Yes, the default AP zone has the default AP group under it. The default WLAN group is mapped to all APs under the default AP group. All WLANs created will by automatically be added to the default WLAN group.

Please check the below video from us for a short demo on this
https://www.youtube.com/watch?v=HwZf0KAKydI

All comments

James

HI,

Please make sure the SZ144 controller is running 6.1.2.0.441 firmware version before adding R850 APs to it.

To create LBO WLANs login to the SZ144 > Navigate to Network > Wireless > Wireless LAN > Choose the Zone > Click + to create the WLAN > configure SSID name, type of authentication, encryption and so on > Scroll down and expand "advanced options" where you are specify the VLAN ID for this WLAN.

WLANs created this way are LBO by default.

AhmeeR

Thank you James; yes my controller's firmware is 6.1.2.0.441.

But let me ask you 2 more very related questions.

1. In this scenario AP connected switch port is either trunk or access? What about the default mode of AP LAN port? Don't forget that I also have management VLAN.

2. In scenario, How can I assign multiple SSID on single AP?

Thank you again.

martin_martin

Hi AhmeeR,

As James mentioned in the advanced options you can set the VLAN ID for the SSID, in that case you can have multiple SSID on one AP with different VLAN (or the same depending how you set it).

And as you run multiple vlan you need to set the switch port to trunk.

regards

Martin M

AhmeeR

I should make the connected port trunk. That is Okay.

But VLAN ID assigned for SSID in the advanced options should be the same as that allowed on the AP switch connected ports? Because Someone told me that AP can manage many VLANs internally being connected to switch port mode access. Can ruckus APs do that?

James

Usually the Ruckus APs are connected to a trunk port on the switch side and the AP gets its own from the native (untaged) VLAN on the switch side. Remaining user VLANs must be tagged on the switch.

The user VLAN for the SSID should be added under advanced options of the WLAN config. Users connecting to this SSID will receive and IP address from the said VLAN.

AhmeeR

Thank you James. Really you showed me the way.

Let me add one more question. How can we make connection, or form relation between AP and SSID? In other words, Do all APs under a zone or AP group are assigned to a WLAN under that similar zone or WLAN group?