nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

My two R510 APS have died.

zacvacek

Hello,

I am the original owner of a Lennar home with two ceiling mounted R510 access points (one upstairs, one downstairs). As of yesterday they are both completely dead. No lights whatsoever.

I bought the house 2018, so they are roughly six years old. No issues thus far until now.

Please advise how best to proceed. Thank you!

Find more posts tagged with

Accepted answers

All comments

zacvacek

Images of APs and Switch here

imran.sanadi@commscope.com

Hi @zacvacek

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS Access Points are not powering up.

Please refer to the below picture and share a FULL picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports.

Please help me with the above query and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

zacvacek

Hi, hopefully this image will provide you with the information you need?

imran.sanadi@commscope.com

Hi @zacvacek

Greetings!!!

Thank you for the response and the update.

As per the light status of the RUCKUS ICX-7150-C12P Switch it is in a normal state.

Please unplug and plug the Access Points ethernet cables to any other 1 in-12 ports on the Switch (Please refer to the below screenshot) then check if they powers up.

Please check and let me know.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.