I noticed there is only standalone firmware available for download for the R770 AP. Is there an Unleased version that can be downloaded? If not are there plans to do so soon?
Hi @Vgernyc
R770 Unleash support would be expected with 200.16 release and ETA would be Somewhere in Jun-July 2024.
Best Regards
Vineet
hi Vineet, are there any updates on the release of 200.16? We are holding off on purchasing R770s until the unleashed release is available
hi Vineet, I checked with "RUCKUS Unleashed 200.16.7.0.325 GA Release Notes" and R770 is not on the support list. Is there any news or an updated plan for R770?
200.16 is released but not for the R770? What is the plan?
Hi @Gecko1 R770 support is delayed to next 200.16 GA refresh.
Is there any release timeline for the 200.16 GA refresh?
Thanks, is there an ETA?
can we get a transparent update on unleashed support for R770?
Hi,200.16 GA refresh will be released tonight. This will support R770 model.
I guess there is a delay. Firmware still not uploaded yet. I gave up on this a while ago assuming Ruckus was waiting for the Windows 11 24H2 release in October to properly support their WiFi-7 products. I way overpaid for the r770 and its lack of support and poor performance. It also really hot to the touch..
finally releasedhttps://support.ruckuswireless.com/software/4201-ruckus-unleashed-ap-200-16-ga-refresh-software-for-r770
Hi TEAM!
What is the procedure since the R770 does not allow WEB access? When the firmware is removed from the cloud, it is only used to return to the cloud.This is confusing.Is there a guide to upload the Unleashed firmware?Thanks"!"!
instructions how to flash an r770 to unleashed out of the box. if not on standalone firmware do a factory reset (note that holding the reset pin for different durations does different things - <5 seconds is soft reset, 5-10 seconds is hard reset, >10 seconds is recovery mode).
1. ssh into the router at 192.168.0.1 (remember to set a static IP address of the computer you are using to connect ie something like 192.168.0.33), default credentials are super, sp-admin. it will prompt you to change the default password right away
2. run the command 'set https enable'
3. log into the web interface at https://192.168.0.1, making sure that you are using https
4. flash the unleashed firmware through the local firmware upgrade path
took me a bit of googling to learn the different cli commands between the brocade/ruckus switch and AP product lines so I hope this helps other people that are searching
Hi,You can upgrade the R770 AP from Standalone to Unleashed from the GUI or CLI.Post upgrading to the Unleashed, you should be able to access the GUI.Let me know if you face any issues or error during the process.
