How to change the vlan for LAN1 and LAN2 ports on H320

Question

I am deploying H320 APs connected to Ruckus Cloud and can not find a way to change the VLAN used by the LAN1 and LAN2 ports. 
Traffic from devices connected to these ports simply goes to the untagged / native VLAN of the AP, which is the management VLAN.

supriya_pradeep · Answer

Configurable options:

·      LAN port

·      Port Type

·      VLAN untag ID/Management VLAN – 1
(mgmt. VLAN always 1)

Port
Types:

·      Access – End users and VLAN-unaware
workstations commonly reside on access links. All ports are in ACCESS mode
assigned to the default VLAN (VLAN 1). Ports set to Access mode belong to one
VLAN only.

·      Trunk – On VLAN trunk links, all
frames must be tagged with the respective VLAN ID’s. The native VLAN must match
on all switches in the segment. (VLAN 1 is default Native VLAN). The native
VLAN is NOT tagged.

·      General – similar function as Trunk
ports but passes only the VLAN traffic that is defined by the user.

unknown · Answer

Thanks very much, Michael

michael_brado · Answer

Yes, this feature is coming in Cloud 18.01 with screen like this:

The release is still a couple weeks away, and should be completely updated by End of June.