nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Ruckus ICX 7150 - no power / unable to reset

Ruckus ICX 7150-C12p Switch does not turn on and has no status lights on. There have been no power outages, and have attempted to reset device multiple times. It has been tested and confirmed that the power outlet it is plugged in is working and I have also tried replacing with a different power cable that is known to be working but no luck. The router it is connected to is still working as I have Wi-Fi working as expected. But all the devices (Ruckus Access Points, Ring Doorbell, Cameras, SmartThings, Door lock, etc.) that are connected to the Ruckus switch are all offline.

Find more posts tagged with

Accepted answers

All comments

Jayavidhya

Hi @CQ

Greetings of the day,

Thanks for the detailed description of the issue,

For further troubleshooting steps please share the image of the switch and the access points showing the LED status and the cable connections.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Here is where you can upload the image/photo :

you can also drag it to the chat.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

I have attached photos of the switch plugged into both working outlets with no LED indicators turning on. I have attempted to reset this multiple times by unplugging the power, pushing reset and holding while re-plugging the switch back in, with no results. The access points are also not powered, as phot was taken prior to unplugging the ports. How do i go about getting a replacement switch for this?

Access Point.jpg

Jayavidhya

Hi @CQ

Thanks for your response,

To approve RMA please upload the video of the switch showing the no light status after replacing the power cord.

Here I attach the drive link for uploading the video.

https://drive.google.com/drive/folders/1qoWQa1jj1FoQ4CioHTJ8e8Kw1j5rZnTA?usp=drive_link

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

The folder states I do not have permission to upload to this shared file. Can you please review this so I can upload on my end?

Thank you.