nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Lennar ruckus switch showing as router instead of switch?

cmaldoff

I was on vacation and came home to my unleashed app showing as a router instead of a switch.

I tried rebooting the switch by am seeing the following in the unleashed app.

Based on the screenshot is this the case?

If so how do I fix this? Is this something that is easy to do?

Thank you

Find more posts tagged with

Accepted answers

imran.sanadi@commscope.com

Hi @cmaldoff

The issue must be fixed now.

Thank you again.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

All comments

imran.sanadi@commscope.com

Hi @cmaldoff

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS Switch in Unleashed is showing a Routing code.

This may be a Routing Code issue due to a power outage/spike. Please refer to and follow the below RUCKUS ‘Lennar Knowledge Base’ self-help guide to troubleshoot this issue.

/kb/articles/2-fixing-ruckus-icx-7150-c12p-switch-routing-code-spr-issue-using-command-line-interface-cli

Please follow the above process and let me know if you are stuck at any point during the process.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

cmaldoff

Hello Imran,

I did the network scan and see the following listed:

icx7150-c12-router.

Does that mean my switch is showing as a router? When I used that IP in the url it took me a rucks screen with a login.

I aslo see a Ruckus Zoneflex listed

Thank you,

Christian

imran.sanadi@commscope.com

Hi @cmaldoff

Thank you for the response and the update.

Yes, the RUCKUS ICX-7150-C12P Switch is stuck on Routing Code. Please perform the commands in CLI mentioned in the guide to fix this issue. And Ignore Zoneflex.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

cmaldoff

If I changed my default user name and password would I need to use those when trying to ssh to it?

cmaldoff

I tried to SSH to the switch via the instructions and am getting a timeout error. Also tried to generate an SSH key but that did not work either. What else can I try?