nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

can't add R700 to ZD3000

unknown

Hello, i have new AP R700 & ZD 3000
FW 9.7.0.0 build 220, i know what i can't add this, because fw is to old. Needed 9.8 fw and above. Where i can take a new fw for connect ap to controller ?

Find more posts tagged with

Accepted answers

All comments

unknown

Hi i will give you further a googledrive link to download it...let me just time to add to my drive

unknown

okey thank you!

unknown

You will need to upgrade step by step (from older to most newer version) until the version of firmware you need.
I prepare a ''we transfer'' link so will have it soon

unknown

https://wetransfer.com/downloads/e972cf6750d47e64cfbb305c55f691ec20170524161711/c5ad136e1dada9c48f46508c4e8d3ace20170524161711/21fcfd

unknown

check and let me know https://wetransfer.com/downloads/e972cf6750d47e64cfbb305c55f691ec20170524161711/c5ad136e1dada9c48f46508c4e8d3ace20170524161711/21fcfd

unknown

Thank you i downloaded it and upgrade to 9.8.0.0.373 R700 added to controller
but after upgrade i see this
Your Support service expires in [90] days. Upgrading your Support service entitles you to future firmware upgrades. Please contact Ruckus Support for further assistance. [What's this?]
What happens after 90 days ?

unknown

Hi this message is only for support license ,if you don't need this don't worry ,personnaly this message appear on my ZD since 2years ,and i can use it without problem 😉

unknown

thank you for help!

unknown

You're welcome guy

unknown

Hello
I have a zd1200 and an access point t301s, and I can not add the access point on the controller, although I ping is well between the ap and the controller, the access point is new and updating On the controller is 9.12

unknown

Hi

How many AP did you have already on this ZD?

What about your AP licence,hiw many AP licence did yiu have?

unknown

How many availlable licence?

unknown

his is not a licensing problem because I have a license of 36 ap, and I have only 35 ap connected

unknown

i acced to the ap by ssh and I notice that the command "set director ip" does not exist, it existe only the commande ''set scg ip"

unknown

"set scg ip" means that use firmware Smartzone/vSZ.
Reset your ap t301 and go to 192.168.0.1. change to firmware standalone t301s. try again ssh "set director ip"

unknown

please how can i change to firmware standalone t301s, i try to download the firmwares but No firmware was running

unknown

You can download the firmware standalone (100.1) 839-standalone-ap-software-100-1-0-0-432-outdoor-aps
please follow my step before