Using MIBs to monitor connected clients

Question

Hi,

We run 9.6.1.0 build 15 on our Zonedirector 1100 running 11 Ap's, we are using PRTG as our network monitoring kit and we want to be able to see the number of units that are currently connected to each AP, we have the most current MIB's from the website which is the sensor we should be using to be able to see the number of clients on each AP?

We have tried the following sesnors:

Radio stats max sta

radio stats num auth sta

radio stats num sta

wlan0/1 num sta

Thanks,

Julius

unknown · Answer

Oh... Sudhakar has a better answer than me.

Here's my answer anyway.

Checking some old SNMP notes...

You should try this:

> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15

> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.16

> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.2

replace $COMMUNITYSTRING with "public" or whatever your community string is.

replace $CONTROLLER-IP with the IP address of your zonedirector.

Did that give you what you want?

My old SNMP notes can be found here:

https://forums.ruckuswireless.com/ruc...

sudhakar_pydi · Answer

You can try this.

You can get total number of clients on each AP by using below oid.

Use 9.7 mibs,

Mib file name: RUCKUS-ZD-WLAN-MIB

Oid:  .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15

String: .iso.org.dod.internet.private.enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANAPTable.ruckusZDWLANAPEntry.ruckusZDWLANAPNumSta

keith_redfield · Answer

This thread highlights some OIDs used by others...

https://forums.ruckuswireless.com/ruc...